Originally Posted by
KSA-Cossie
i am col yes,set to mike rainbirds advised settings but sits a wee bit higher at one side,konis set hard at back and mdium fronts
just the same settings then,
my beam was hitting a rivet on passenger side and seat belt bolt on drivers side,rivet was stopping it hitting bolt so was sat higher/lower on one side,not a big job,if you slackened beam off take seat out,chisel/drill head off rivet,put washers under seat belt bolts or cut most of the plain bit off the end of bolt,probably 5mm,just watch not damage threads its unf,ive tap and die if needed tho,
colin