Old Mar 15, 2010 | 09:39 PM
  #10  
COLEYST200's Avatar
COLEYST200
PassionFord Post Whore!!
iTrader: (3)
 
Joined: Sep 2007
Posts: 8,243
Likes: 144
From: Leicestershire
Default

Right bit of a update we have been working on the car all night and this is wot we have done.

put a new map sensor ............it did make the car run better and the AFR was better
but still not right

new TPS
but still not right

new fuel reg
still not right

new plugs with a gap of 0.6mm
still no good

and for the last thing on the list the pump wire which we did Xmass and it was ok then
well when the car is on tick over we have 11.8v and still 11.8 when driving
so we ran some wire in the car but it was only 1mm but it did lift the volts to 12.6 the car still ran shit we then put the volt metre on the wire coming from the battery and that was showing 13.8 so we are down on the volt at the pump now . so we are going to have to rewire it this weekend and get a new map sensor of MATT LEWIS

Now do i have to spend £40/£50 on a pump wire kit or dose some one have the info on wot to do and sizes of wire to do this job
Reply