Originally Posted by
Delta-Force
right bit of a update i removed my battery tray and battery pas headlight grill intercooler and cover along with the lower bumper grill and checked the loom from the horn it splits into 2 one goes to pas fog light and the other goes to the horns i had a lood look around the crash bar behind the bumper and on the chasis legs and cant for the life of me find this outside temp plug

the wires are there on the plug that goes into the trip comp display inside the car and ive tested these with the sensor and it works fine .. but im thinking the wires are taped off someware in the loom i opened the loom caseing under the battery tray and theres no WH/BK & BN/YE wires in the loom so it must end before it gets into the engine bay so might have to extend the wires from inside but its only 2 wires so not all bad i guess
oh the joys lol
The wire should be clip to the front crossmember if you take the lower grill out not the top one and put your hand up and just slide your hand along it you should feel it clip to the crossmember. ive fitted 5 of trip computers to diffrent focuses and theyve all been there. and it not a focus rs your tring to fit it to is it?