well a bit of a update the wire to bypass the washer bottle sensor is pin 1 on the trip loom if you have the plug faceing you with the wires comeing out of the bottom its the bottom left pin on the tis there is only 1 wire going to this sensor its black & orange the other wire on the sensor goes to ground so if you tap into the loom behind the trip comp and ground that wire no more annoying light saying you have no screen wash

the other thing is i still cant find the plug for the outside temp sensor i know its pin 8 and pin 9 on the trip comp plug brown & yellow and white & black wires so today i spliced into them and wired the outside temp sensor in the car just to test it and it works so when ive got more time i can trace the wires to the front of the car or at worst add my own wires from the comp to the sensor theres a loom that runs right across the bar under the bumper that has black trunking over it so it maybe tucked inside there i will try and have a look when i can and post my results up

cheers mark