no prob i also read it was behind the vents myself but i pulled my headunit out and didnt find anything there so removed the clocks to check if there was anything on that side and it was taped to the bar at the back yeah the outside temp plug has got to be there somewhere i would of thought its just finding it .

it was cold and wet yesterday and my cars lowerd so between that and the engine gaurd i could not see much i removed the lower grill but could not find anything taped onto the crash bar or behind it ive got a tis cd here so have been looking on there it says pin 8 BN/YE and pin 9 WH/BK are the wires for the sensor so today i will have a look if they are there on my loom also someone else said the plug is clipped onto the back of the rad this could be right as theres about 8 to 10 inch of wire on the sensor ive got will post my results later today anyway as this post should help others too i looked high and low for the info and found almost nothing tbh .

cheers mark