Hi Mark,

I did the same as you, got the trip computer really cheap on ebay and thought I'd see if the wiring was there once I knew what the connector looked like, if it's not supported then I'll just put the trip computer back on ebay. I'll only order the temp sens/stalk/dash surround once I know if the loom is there.

I did read that ford normally fitted either all the connections or none, so theoretically if you have the trip computer connector the temp sens one should be there.

I had read the trip connector was behind the centre console air vents so took the radio and airvents out yesterday, could only see bunch of wires behind impact bar. Thanks for the pointer as it will be much easier if it's behind the clocks.

Matt