View Single Post
Old Feb 22, 2010 | 09:34 AM
  #2  
Karlos G's Avatar
Karlos G
Balls Deep!
iTrader: (4)
 
Joined: Jan 2007
Posts: 9,185
Likes: 25
From: Suffolk
Default

Did you just turn your boost from 10psi to 15psi without having it setup by a tuner?? If so that will be why it failed

FMIC & fans
Cometic HG No stay Ford proven for 350bhp+
New head bolts
Skim head & deck block
Remove pistons possibly replace rings and bearings and new cap bolts Certainly bearings as it's about £90 for a full ACL set!
New or refurbished oil pump? New
New sump and gasket (old one beginning to seep)
Have crank checked and reground if necessary
Ideally new or steel rods if £ allows No point getting new stock rods, but steel one if you can yes, although you will need your pistons machining to fit, or new forged pistons
Check and reface flywheel if necessary or replace
Low profile trolley jack (old one broken anyway)
Engine stand possibly
Silicone coolant hoses
Reply