Originally Posted by
tabetha
The beam fits perfect, you will as you say if using sapphy arms need to use the sapphy arb, which is miles better tbh, unless you just use your 3 door arms sapphy beam ?
The best way to mod it is to get a few bits of say 4-5mm thick metal 1 1/2" wide and about 5" long, put the arb clamp on this, and mark the hole position and drill/tap the hole, then easiest way to sort other end is weld another "eye" type fitting as the other end, make this then drill tap again, offer up to the car to get good placement, then mark it, then measure to ensure centrally located, mark the position of the bolts that need to protrude through the box section and drill out these holes larger than the bolts.
Weld plates in position job done.
tabetha
thanks mate, i have a good idea how to do it now
i bought a adrenaline rear beam and arms that was from a saph. thats why i need to fit the saph arb and can't use my 3dr arms.
i have thought of another way of fixing the arb to my chassie. will this work?
find someone with a scrap shell and cut the section out of there chassie where the arb fixs to and weld it onto mine where it needs to be?
i don't mean cut any of my chassie away just trim down the part removed from the saph and weld on top of mine.