Originally Posted by
jon@work
to set up a PF09 :
1. With the ECU multi-plug plugged into the ECU, turn on the ignition.
2. Connect your negative probe to ECU Pin 1
3. Connect your positive probe to ECU Pin 17
4. Adjust the sensor to read <0.35volts at idle position.
Alright Jon@work,
Thanks, thanks alot. This kind of instruction I understand. Brilliant.
Just on the subject, I didn't know if I'd turned it the right way while trying to set the tps by feel alone. I turned clockwise. Dug out my w.s. manual last night to check it's opinion, and in very clear english it says 'rotate anti-clockwise etc' (My FAIL!!
so with your info, I should be able to get her as near as dammit to original. Sweet.
