Originally Posted by daddy cool
ooh i say !
only jokin m8
Originally Posted by daddy cool
using the spare wheel well is a superb way to minimize the amount of space taken up . u need to strengthen it up a fair bit using fibre glass and ideally mdf strips
I was thinking about building an MDF enclosure to drop in the well, would I still need the strengthening you mentionned ?
Originally Posted by daddy cool
but the wheel well has only just under 2 cubic foot of useable air space , so you needa sub that has been designed to work in a small enclosure
Measured it up and it looks feasible.
Originally Posted by daddy cool
also need to remove the fuel cutoff from the well as the vibes directly inside it will trip it
Now that's not something I had planned for, how d'you go about that then ?
Originally Posted by daddy cool
one last thing , subwoofers were never designed to run flat , which means you will need slightly more power to keep controll over it properly (compared to a woofer in the upright position)
I have plenty enough power, not a bass junkie, just want enough to back fill...
Thanks for the pointers.