Yes it can be done have done to my own 2.0 zetec you will need the dash surround from a ST170 as the gauge sits where the coin tray is.

You need to splice into your wiring loom at fuse 36, 41 and 61 then splice into the oil press light wire Orange/ Black wire and splice into the Generic Electronic module connector 104 pin 18 Orange/Black wire and splice into pin 2 and pin 10 on the DLC 9 Data Link Connectorand splice into pin 9 at the light switch connector.

The oil pressure gauge will work but the oil temp will not till you fit a oil press/ temp sender for a ST170 and you will have the ice warning light on until you fit the ice warning sensor ford want £68 inc vat for the ice sensor but if you go to rs/st spares on ebay they will supply a new sensor for £8 inc P&P.

You will also need the plugs for the gauges and sensor from a ST170 wiring loom as ford do not sell the connectors and pins can only get them if you order a wiring loom.