Originally Posted by
pdfbt40
AFAIK all Focus, as a completely new model, used current Ford technology.
I don't know of any Focus that used the older 'passive wheel speed sensor' and a toothed wheel (same technology as the crank and cam position sensors).
Obviously this change over is a problem on other longer life/earlier models such as the Mondeo. Different ABS controllers and sensors across the model range, even in the same MY.
[hr]danny_248, ST170 front disks are 300mm not 280mm.
What hoses are you fitting at the back (to drums)? The best scheme for a standard rear disc is a single 440mm hose (post 2002). It will work on a ST170 disc as well, though a bit tight on full travel. There are various hose/pipe/hose setups on earlier rear discs and also on the ST170/RS and having the right brackets and hoses can be great fun.
Martin
Perhaps because i did mean 280mm (so they are 280, actually 278, not 300) front disk upgrade, they are from a 2.5 v6 mk2 mondeo. . . and there is also a 300mm option, but for this, to avoid machining the calipers, i am going for 280, (sorry if this seems a bit pushy)
