Remove all the trim, glove-box, heater controls, ashtray panel, centre console, clocks. upper/lower column shrouds.

Steering wheel off, Column out. Pinch bolt where it joins the rack, then 2 nuts underneath and 2 nuts facing driver.

7 Torx bolts out. 2 each side and 3 along the top.

Support straps behind the Ashtray panel, 10mm nut behind the heater controls.

I think thats pretty much it, obviously disconnect wiring and plugs as you pull the dash forward. It's really not that hard. Hope I didn't forget anything.