well, i retimed it today by removing the dizzy cap and lining the dot and line mark up.
started straight up yeehaa, other good news is that the snapped connector on the sensor just goes to the airbox.
the phase sensor rotor arm dizzy cap and leads are all new and so is the coil witch is an uprated one im told, its also had a new stat recently so i left it.
well it runs now but its down on power, it doesnt seem to boost like it should and im sure i can hear the wastegate letting boost out from 4k up.
im pretty sure the timing is perfect now, would having a cam out by 1 tooth make a big difference?
thanks again this site rules!!