Not too sure what it's saying, coz in one bit it says that the st170 setup will "bolt straight on" and then it says that the standard 1.8/2.0l callipers are attatched to the hub so "bigger discs are not possible"
Could someone clear this up please?
Focus 2.0 16v and ST170 share the same Hub, Spindal and caliper. Only difference is the caliper carrier for the bigger disc.
Also the ST150 set up is the same as the Focus 2.0 16v Zetec. (255mm Disc)
The Focus RS shares the same caliper/carrier but the Spindal pushes the Hub out a further 8mm.