Originally Posted by
cossiegreg1
Just a guess but maybe ISCV.
never thought of that
Originally Posted by
BM08
Yeah id say idle speed control valve, i had 2 zetec escorts and a bmw that had funky idle speeds and stalling, it just needed a bit of a clean up and they were all fine after that
ill have a look tomorrow
Originally Posted by
T3ORA
were do i start lol
make sure you have no broken vac pipes,all so check the servo pipe
follow it from the servo to the inlet,were it joints on the inlet there should be a bit of rubber pipe about inch long,make sure it it hasnt collapsed or has split
next
all so make sure the rubber mount for the single point(carb)has not split
start the engine and with it running glab the top of the carb and move it about and see if it cuts out
failing that,carb cleaner and clean the throttle body out
hope that helps
it does mate,ill check all of them tomorrow and report back here
