Originally Posted by
Flux Capacitor.
If all else fails....
Is the map sensor in the original place ?
Are the plug leads or coil near the map sensor ?
Is the bracket holding the coil earthed ?
Is the ignition amplifer(s) earthed/bonded to car body/earth ?
Are the plug leads tighly cable tied to each other ? (Bad if they are !)
map is were it should live
its on a wasted spark set up bolted on the bulk head out of the way
coil pack is bolted on
and ignition amplifers have got bonding greas to the dody
the plug lead are next to each other but no cable tied and there new ford one,s
but saying all this it did the same when it ran the old set up which was a group a coil motor sport leads and the dizzy and one amp