Right basically its been doing it a while and want to try and sort it before it gets set up or i'll have to get them to sort it.

Basically when u pull away if u dont give it more revs than u normally would the revs drop and it tries to stall (thought it might be the paddle clutch with standard cover plate but....) when u change gear then touch the throttle it holds back and hesitates, does this till u put more pressure down then it pulls fine and drives ok etc even on boost.

I thought it might have been a couple of the leads being loose but sorted those, phase sensor seems ok and i gapped the crank sensor when i fitted the replacement pulley, plugs were new 500miles ago also. Could the tps cause it?! know it has a slight adjustment to it if u slack off the screws.

Was great fun trying to nurse it home in the snow last night holding back on the revs but trying my hardest not to stall it

Cheers