Originally Posted by
eazy_ways
Hi, looking for some advice on the some essential parts for 500 bhp build, the motor and head are sorted but am now onto the expensive parts (turbo & fueling). I have been looking at a GT30 with external w/g and a swedish plenium but would be grateful for some good advice on a good combination (injectors, rail etc...). For info I have an autronic SM4 unit for the clever stuff. If you have any parts that you are thinking of parting with let me know.
Thanks in advance
Jay.
you need deep pockets it cost shed loads to do it all i am nearly at then end of my build and had no change from 20k
go for gt35rs with the rayland 2wd manifold kit for tail v44 external waste gate swidish are ok i have one for sale cause not using it due to having to mod the intercooler so i have gone back to rs500 inlet
you need to have 74mm inlet on turbo and intercooler and inlet manifold
pro alloy do a bigenough cooler to take power cause a normal 500 cooler is not big enough
you need 2 o44 fuel pumps and swirl pot
semiens 83lb if going for swedish or 8 injectors if going diff
what speck is the internals of your engine ?????????