Thread: Red chip keys
View Single Post
Old Dec 22, 2009 | 09:40 PM
  #7  
Moonie's Avatar
Moonie
I've found that life I needed.. It's HERE!!
 
Joined: Jul 2003
Posts: 1,190
Likes: 0
From: North West
Default
  • Insert master key into ignition switch
  • Turn ignition to position 2
  • Wait until system LED illuminates
  • Switch off ignition and remove master key
  • Wait until LED illuminates again then goes out
  • Carry out the following within 10 seconds of the LED going out
  • Insert key to be programmed into ignition switch
  • Turn ignition to position 2
  • Check LED flashes once to indicate correct programming
  • Switch ignition off. Remove key
  • Repeat complete procedure to program remaining keys
Reply
0