Had a look at that link mate, can't really see all the bits you need there.
But here's what i'd reccomend;
1 Metre of hose (pt.no 200-6) page 16
1 x AN-6 to M14 x 1.5 to screw into your filter (pt.no 30...06-14) Page 19 (you'll need a copper washer too)
2 x Hose ends to -6 female thread (pt. no. 1136-0106) Page 16(but you could opt to use 1 hose end and a Banjo hose end on the other side and elimitate the banjo i've listed further down.
Plus you'll also need to confirm the thread for the cap on your fuel pump, the info i have is for a 044 pump and i'm sot 100% sure it uses the same valve.
But the cap i used was an M12 x 1.5 ,and you'll also need an an M12 single straight Banjo to -6 Male thread, IF it's an M12 cap your using.
At work at the moment so can't draw/post pics, but if you need anymore help give me a shout. I'm not saying you can't use jubilees, but it's just my way of making sure everything is as good as it can be.
Last edited by rog; 17-12-2009 at 08:03 AM.