Yes if you use a std 10.9/12.9 caphead bolt m10 x 150mm long the max toque setting for these is 75lb/ft as these bolts do not stretch as they are not designed too hence the lower torque setting to the std cvh bolts that have to be toqued to yeild or laymans terms (stretch bolts)
and because they are not yeild bolts they can be re-used again and again the setting i use are:

40lb/ft stg1
65lb/ft stg2
75lb/ft stg3

run till warm then recheck 75/lb/ft

hope this is of sum help??