getting the hump now
as you can see from the pic i have fitted the plenum and the hose but i have two problems now.
1 i get a plenum throttle cable mount of ebay.i can though wednesday iwant out happy as pig in shit and dont fit.ie it hits the sillicon hose (fxxker)
now im 100% sure there is notthing wrong with the mount as if the pipe was on a sierra or escort it would be fine? but its not .
2 where do i fit me dump valve as at the moment i cant fit it to the hose as it will sit in line with the throttle cable??
help now guys
1 i twist the throttle body around untill the throttle cable sits on the left not the right ?
this will do two thing let me fit the cable mount and cable and also allow mo fit the dump valve into the hose???
but will i habe any problems running the throttle body that way?????
also with the dump valve i could weld the mount onto the front of the intercooler so it would be out of the way.
this would sit behind the front right hand spotlight??
what do you guys think
need to get this sorted this build has taken to long
i gave my self 6mouths to build it and i am runn out of time
thanks guys
