View Single Post
Old 25-10-2009, 02:37 PM
  #1  
biggiejody
Too many posts.. I need a life!!
iTrader: (3)
 
biggiejody's Avatar
 
Join Date: Oct 2005
Location: spalding lincs
Posts: 520
Likes: 0
Received 0 Likes on 0 Posts
Default Breaking ST24 RSAP

Front bumper, gen ford, with the foglights,surrounds and mesh, around a 6 inch scuff at bottom of bumper, and minor stonechips...£80 **

Front bumper, gen ford without foglights,surrounds and centre bar has been removed needs painting and some fibreglassing/fillering..£30

Rear bumper, gen ford, with an extra hole cut for twin exhaust. been done tidy..£80 **

Rear bumper, gen ford, with an extra hole cut for twin exhaust, has had an LPG conversion and the hole needs fibreglassing over as filler has sunk..£50

sideskirts, gen ford with all 4 jacking point covers. small split on NSR but not that noticable, has V6 badges on which can be taken off..£60**

sideskirts, gen ford without jacking point covers, paints cracked, ruined at the front of both, slightly bent where have been in the garden for a while..£30

Front grill, gen ford, proper metal mesh complete..£40**

ST24 set of 4 wheels, with michelin pilot tyres in 205/55/16. Couple of scuffs but good conditon, not buckled, all tyres are legal and good conditon (apart from one wearing slightly on one edge)..£150**

Twin stainless steel exhaust made by blueflame, gives a nice burble when driving along but not a stupidly loud exhaust, no leaks..£140

Single 4 and half inch stainless steel exhaust, unknown make or sound all been welded so complete ..£80

Gen ford cat converter £50

Gen ford later spec silver dash panels and silver gearknob, not been home sprayed, nice condition..£65

Chrome doorhandle for inside doorhandles (later spec) ..£15

Full ST24 seats and doorcards, doorcard fabric slightly lifting on both front doors(behind th door pull) seats are clean, drivers seat has around half inch of stitching coming undone..£100



Everything else avalible apart from gearbox or engine as havnt got stuff to take it out with but your welcome to do it yourself with your own tools

As soon as numberplate is transfered the shell will be going to the scrapyard, all the above will be taken off, so anything else needed will have to be aranged so i have enough time to take it off

Bigger stuff may need picking up or may be able to deliver for cost, or you are welcome to send own courior