I cleaned the MAF Sensor and did an ECU rest, no change.

Replaced the HT leads with some Magnecor leads and same issue.

Sometimes it will drive fine to the red line. It seems it starts off OK and to begin with you can drive right through the rev range but once the problem starts unless you stop the engine and leave it for a while it will keep happening. Hesitation seems to be at approx 4750 RPM.

If you rev it with it in neutral it seems to get past this point OK even when the problem has set in.

Desperation has set in so before I take it into Ford I am running some BG 44K through it. Does any one have any experience with BG 44K ?

Sorry to here you have the same issue seve170. If/when I get the issue sorted I will post on this thread, I would appreciate it if you did the same.

Cheers,

Mark