Originally Posted by
Mark_1
Here are some pictures of the bearing adapter.
Looks neat.
Even more neat is the Oz mag wheels i just have bought, they will arrive in norway as soon as i get hold of some rear brakes aswell.
problem with these is that they flex causing pad knock-off so i got steel ones made and also you need to machine a wider bearing surface onto the flange then that weakens it causing it to snap off, and cause the bearing is wider the shaft doesn't go right throu the flange so the splines are driving the weak part,,thats even leaving a radius in the corner and putting a radius on the bearing,,and also you will want to take a thou of the mateing faces of the bearing to tighten them up a bit.
i went back to the original type at £300 a bearing!!
thou some aparenently never have problems with them!