A few parts arrived this morning so cracked on.
Originally Posted by
Danster76
On the job card for tomorrow is;
1. Fit crankshaft oil seal (flywheel end)
DONE
Originally Posted by
Danster76
2. Fit (yet another - should get shares in Payen!) sump gasket - Would be wrong not to when its in such a good place to get at it.
DONE
Originally Posted by
Danster76
3. Replace NS CV boot - pin hole leak making the wheel dirty
DONE
Originally Posted by
Danster76
4. Sort steering column bushes
NOT DONE
Originally Posted by
Danster76
5. Try to source and fit a garratt -34 actuator. After recently buying a new Collins -31 I've been led to believe a -34 will be more suited to my spec! joy. Anyone interested in an 'as new' -31 collins give me a shout!
DONE - ARRIVING BEFORE 1PM TOMORROW - TA MSD
6. Order reverse light switch - mine's leaking
[/quote]
DONE - FIT IN THE MORNING 2 SECOND JOB
Originally Posted by
Danster76
7. Re-think current positioning of coolant rad and possibly cooler as actuator is scarily close to spanking new rad!
DONE
Originally Posted by
Danster76
8. Fit new pad fitting kit - Ordered from Big Red (Caliper re-manufacture company) as old pins are fooked and keep working loose.
DONE
Originally Posted by
Danster76
9. Think about getting my head around buying cts stage 2 gearbox
DONE
Back in with the clutch and have a think about it...
Originally Posted by
Danster76
10. Get my head around buying gearbox
DONE
Originally Posted by
Danster76
11. Drive, pay for and return with new box
DONE - 200 miles later and she's on my shingle!
Originally Posted by
Danster76
5 days from tomorrow to get this car back on the road and up to blackpool...No pressure
Fingers crossed, she should be back on the road tomorrow afternoon...
Opt'd for a cts stage2 quaife diff jobby.
Cheers
