Hello all.

I'm having some problems with my zetec turbo.

Trying to set my boost a little higher with a bleedvalve it can't hold a decent amount of boost.

Had a -31 on before and now put an even stiffer one on but it can't hold more then 0.8 bar (12 psi)

i'm getting 1.3 bar (18-19 psi) when the turbo kicks in but rappidly goes to 12

The turbo has some play but can that cause this drop at such low levels?

It's a 2 litre zetec turbo with stage 3 rst t3.

Thanks