Got some pics of my rust problem and did a bit more to my plug, please excuse the uality of the photos I couldn/t be bothered to set up the DSLR so I used my cheapo 3MP camera that doesn't focus very well!!!

Heres the passenger rear wing;





I'm going to cut this out and weld new bits in, I repaired this with filler a few years back when I swapped everything over from my old Saph. I've learnt to weld since then

Drivers side rear wing;



I forgot to rotate this before uploading will do the same to this as the passenger side, once I've repaired these and smoothed the bay out I can sort out a respray as up close the paint is a mess.

Did a bit more work on my plug today;


Cables soldered on


Filled the holes with silicon sealent to help prevent water getting in.

I couldn't go any further with this as at this stage I discovered I'd brought the wrong size sleeving, so I've had to order some more now!!!!!!

Should make massive inroads next weekend as I'm trying to book next Friday off, I'm hoping to get the skirts off, if the weathers bad I may look at making a bracket for my coil pack.