as seen being built hear

https://passionford.com/forum/restor...now-wooop.html

spec

2.1 zetec turbo

standard grind crank
new shells bigs and mains made buy AH
new oil pump
new water pump
oil drain pressed into block
breather relocated to the back of the block
frount breather blanked
new seals and gaskets through out
1.8 sump + oil pickup ect ect
vauxhall c20let pistons + new rings
head rebuilt with 16 new valves and focous rs valve springs (good for 20 psi at 7000rpm or 23 psi at 6500rpm)
gen ford focous rs head gasket and head bolts standard cams 16 new lifters
at the moment the engine is fitted with standard rods but will come with steal rods that have had the small end reemed out so they will fit the c20let forged pistons.
what you read hear is what you get lol

open to offers realy the engine has been run a few members on hear will conferm this i dred to think how much this has cost me