Old 24-07-2009, 10:11 AM
  #13  
Dave SCP
15000
 
Dave SCP's Avatar
 
Join Date: Jul 2008
Location: in other peoples garages
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bookwyse
I have tested all of the above filters using a laptop and logging the results on both town and open journeys. Even running two cars with diffrent filters on the same route together and stand by the cone filter with plenty of cold air feeds. If you run a cone without the cold air feeds then it will suffer from heatsoak but mine doesnt. With mine on the rollers it made 243 with the K&N, 235 with the Viper and 228 with a panel filter. This was all done on the same day and within an hour of each other.

I have spent a lot of time and money looking into this. The three photos above were all taken on the same day after doing some of this testing


And yes they were all mine. I prefer to do myown tests and make my own conclusions where possible.LOL
Not being the most mechanically minded person the cold air feeds , are they something that attach to the cone or something attached at varying points of the bodywork to direct cold air to the cone or both