Originally Posted by
1st turbo
were do i find torque settings, some people say a standard build engine is good 4 about 350hp, or is this toilet talk.. my engine is running fine at mo a bit tappy at cold start.. was looking 4 a 3 door or engine rebuild,,, belive ts a hard choice matt..
standard internals will handle circa 500hp, but your head will be restricted at around 420hp
if you've got a 2wd engine then they tend to be a bit tappy due to piston slap - if it aint broke dont fix it!
all torque setting are in online manuals which i'll dig out if you want