Thread: Cam Setup
View Single Post
Old Jun 20, 2009 | 02:22 PM
  #7  
jon@work's Avatar
jon@work
Advanced PassionFord User
20 Year Member
iTrader: (5)
 
Joined: May 2004
Posts: 2,400
Likes: 8
From: Nottingham
Default
THAT IS NOT TDC !

set TDC by lining up the trailing edge of the lug (sticking out of the crank pulley) immediately after the V notch (ie rotate the crank approx 5 degrees clockwise from the position shown in the photo)
Reply
0