View Single Post
Old Jun 18, 2009 | 08:30 PM
  #31  
jacko996's Avatar
jacko996
I've found that life I needed.. It's HERE!!
iTrader: (2)
 
Joined: May 2007
Posts: 1,047
Likes: 0
From: Under the Car as usual!!!
Default

Originally Posted by turnover
ok to make the job cheeper ,get one from a tvr tuscan ,still a tremec and these cars run alot of torque,but also alot of these boys run them in the tuscan challenge and some are cica 600 ponies,so do take the abuse,can be bought for £4 to £500 from tvr breakers,the only problem you will have is the gearstick is about 8 inches further forward,but this is easily rectified as you allready have a t5 box so unbolt the rear tail housing and bolt to the tvr box then your stick and g/box mount will be in the same place,also the t5 bellhousing bolts straight on so no hassles there,alot cheeper and alot stronger ,job done
That sounds to easy to be true.
The T5 has a selector shaft that runs from the gearshift to the selector forks on the top of the gear box, I wouldnt not have thought the tremec box has the same set up??
Reply