Ok at 1am this morning I was on the case to sort out what was happening as I had had about 3 people mention this to me over the last month.

The problem has been traced and rectified as of 10am this morning.

Due to a change in supplier the radius of the track control arm's ball joint end is now bigger and this was not accounted for in the jig, so the arms were getting cut off 10mm to long

Thanks for bringing this to my attention Col and it has now been corrected.

If anyone who has had them recently and is struggling to get them to fit CompBrake will post out free of charge parts to make them correct or they can be returned for a replacement.

Drop me a PM with invoice details and I will ensure this gets sorted.

I have also asked them to change the jig so they do offer positive adjustments (for people with lowered cars who need to pull the arm in from standard) so again from the next batch all arms will offer 10mm minimum positive adjustment as well as the full negative adjustment.

Tony