Originally Posted by
stu21t
It's got a bd10 and 14 cams, 24.5mm ports(pretty sure that's correct) 10mm inlet spacer with 4x4 cover. 8-1 CR
It drives fine when driving hard when I said miss a beat I meant when casually driving it stutters slightly, doesn't feel like it's blowing the spark out.
I think it's more to do with the old loom than anything.
B4 getting it on rollers for a check over/thumbs up I'm going to get a new loom, wasted spark fitted, new plugs and some new sensors.
That's me skint for another couple of weeks LOL
The looms are old not and degrade over the years and if the ignition system is not 100% then you can get the shudder you are talking about,which nearly every cossie owner has encountered!!
So with a new loom and a coilpack upgrade it should be 100% but all things are not a easy as that lol sensors which are gapped must me good and within spec and also the mechanicals too a worn dizzy shaft can cause gap issues with the phase sensor etc etc
Make sure your loom maker knows what spec you want ie wasted spark this will save unessesary multiplugs and will make installation easier
Paul