Originally Posted by
tabetha
Very interesting what you say about the strut/shell dimensions, as I'm looking at a few to see if this is the case, as someone else is having problems that seem to be down to a narrower shell/chassis on some 3 door!!
WIRE COLOURS,
thin green is tacho
red/blue is permanent live
black is SWITCHED LIVE(from ignition)
black/red fuel pump live
brown/white temp sender GAUGE
brown/red air con, this will go to a purple relay holder normally taped to the side of the loom around the relay area
The above is for a 2wd sapphy loom, tacho wire is often in the CAR loom, as ford liked to change thgings a bit.
Just ignore air con(unless fitted)
tabetha
Spot on cheers!! Dont suppose you know what colour wires these match with on the 3dr loom do you (are they matching colours?) Just to make sure i get the right wires matching as the plugs are very different on the 2wd loom to the plug on the 3dr loom and they will need joining directly.