Originally Posted by
Christian and Beccy
A decent Strut brace on an S2 isn't easy, getting it to clear the Inlet AND the heater box is tricky. The Sparco/OMP ones don't seem to sit on the turrets very nicely either, but they do work OK. I would certainly drill 8mm holes in the turrets and nut/bolt it, at least then you can pull it down nice and tight.
Thanks for your advise Chritian. The brace i got is a Sparco one, and i agree, when i offered it up, they dont sit well. But as you said, with using nut and bolt, should help to pull the brace down flush.
I guess i am gona have to adapt the "suck it and see" procedure when it comes to the bolt length!! As 25mm might even be to long??
Cheers