Thread: Help with EDIS4 Crankshaft VR-sensor hole drilling
View Single Post
Old Apr 9, 2009 | 02:49 PM
  #4  
nthorpey's Avatar
nthorpey
I've found that life I needed.. It's HERE!!
 
Joined: May 2003
Posts: 1,260
Likes: 0
From: Essex, UK
Default
I dont have any dimensions but should be in place that the end of the sensor detects the teeth on the back on the EFI flywheel.

but i assume you already know that so a free bump
Reply
0