Thread: How to convert P8 to L6?
View Single Post
Old Feb 23, 2009 | 06:15 AM
  #9  
Stu @ M Developments's Avatar
Stu @ M Developments
PassionFords Creator
iTrader: (12)
 
Joined: May 2003
Posts: 28,824
Likes: 95
From: Blackpool, UK Destination: Rev limiter
Default
Originally Posted by Lars_Ferm
0,8-4,53v
Correct. So fitting a PF01 will feed the ECU an open circuit signal at idle, which flags as a TPS fault and disables/affects a few strategies such as overun fuel and idle control.

PF01 will never work correctly on a L8 - P8. Its a bodge.
Last edited by Stu @ M Developments; Feb 23, 2009 at 06:17 AM.
Reply
0