Originally Posted by
manoj
It’s very strange. doesn’t seem to hold an idle, just revs up and down a little and run rough. Not so bad when at 3k but under that its not right.
With the ISCV disconnected is starts up but I have keep some revs otherwise it just cuts out. I guess I need to adjust the idle with the Valve disconnected first to get a base idle.
Should I loosen the TPS and adjust this, I replaced this with PF09 (red 4x4) for the L8.
I left it loose and let the throttle find its natural position, not sure if this is correct.
could it be the fuel pressure reg or CO.?
thanks,
Manoj
Do you have a 2WD loom? If you change to a L8 you have to change the outer wires of the TPS.