Originally Posted by
Garage19
The rising rate linkage is designed to increase resolution at low throttle plate openings.
In basic terms on an original tb 10mm of pedal travel might have been the equivalent to the first 16th of throttle plate open. With a linear linkage that 16th might become 8th and with the bigger throttle plate that might be the equivalent to a quarter.
Cheers for the info , normally only use wot any way
Originally Posted by
CossieRich
Where did you get a 14mm spacer from?
Its just some bent 3mm plate and then all welded together .
Originally Posted by
Danny B
you back out this year Puddy?
Should be mate , fingers x'd!
puddy
