Originally Posted by
Kamike
So lets say for arguments sake you had built a 3dr and with the spec you built it to were expecting say 400 bhp. Would you choose one type of dyno over the other to test the power because that would give a higher figure or am i still getting the wrong end of the stick?
only if you want to go to the pub and brag about it
it's about how accuratly the figures are obtained if it's just figures, the whole point of doing this is to make sure the engine is running right at the right places and to measure all the bits that need measuering to make sure they are doing what they should be doing when they shoudl be doing it
it's like asking you to carry a bag af cement up a flight of stairs, yu can carry the cement bag yes, you have lifted it yes, but going up the stairs you have a heart attack and die, if you were checked out before you strated the lift this may have been apparent and something could have been done to avoid it, and i think that's the best way to describe the use of the dyno
