I don't know which is best, but what is sure is that the angle they are fitted at that has the most importance if they are tension struts and are the same angle as the std antiroll bar , they will induce nose dive during braking. That is why there are kits to lower the mounting points to avoid nose dive during braking. I am not sure as i never had any of them, but what i am sure about is that on my cortina i have double width mounts for the std antiroll bar, and fitted with a special type of teflon bushing which i had made by a local shop. I know that compresion or tension struts ar more rigid and direct, but i am concerned when (hope not) i hit a pavment . With the std mounts i hope the bolts will break, and with struts , i think damage to the chassis will occur. This comes to mind as i remember when i went up a pavement with my daily blue oval , its a fiesta mk3, I couldn't believe the wishbone got bent, and when it took it off , i couldn't believe it was made so flimsy, I was complaining about this with a friend because we were discussing if i had to work out something harder, but he has some more experience in demolishing cars, he said , now you can go buy a new wishbone, if it didn't bend, the chassis would have, and the fiesta's chassis is still ok.

Warren