Thoroughly de-grease the edge connector to remove all traces of grease and lacquer. This is very important to ensure a good connection. If the connection is poor, then the engine may not run properly and / or the ECU and Evolution modules may be irreparably damaged!!
Jim Reads: "Give the connector a quick wipe with your finger and it should be alright"
Carefully push the module supplied on the the edge connector, so that the edges are flush with the ECU as indicated in the picture
If you have any problems or concerns, don't hesitate to call us
jim Reads: "If it dont work first time around, try i plugged in upside down to see what happens"
