I have a 88 2wd saff. Swapped the engine out of a running doner car and finneshed it all and ive never got it to start since. My original engine started ok before but the bores were gone and smoked badly hence the engine swap. So ive fitted a new phase sensor and tdc sensor (both gapped correctly). plugs leads cap rotor . new 3 bar map sensor new group a coil . new battery . fresh fuel , new filter .new timming belt and im sure i have lined it all up to the workshop manual correctly.

I am getting spark on all leads and plugs, And the injectors have been sent away to be cleaned and tested they are spraying out fuel ok when i pull out the rail.

Only way i ever get it started it with a tow in 1st gear and neads to be about 3000 revs then it runs roughly. it starts off the key after that and still runs rough leave it a day and it wont start off key.

I am lost anyone have any ideas what could be the problem. something is telling me its the dizzy allignment but its bang on the mark ive swapped the temp sensors surely i cant have 2 sets faulty ?

Any help would be greatly appreciated .