Originally Posted by
boXXer
your supposed to use feeler gauges between the thackery washers and gap them up. (cant remember setting though)
make sure the throttle cable isnt keeping the butterflies open a tad, as that will make it rev obviously. i would undo the cable and slacken it right off.
are you adjusting the idle mixture screws, or the SINGLE idle throttle screw?
using the SINGLE idle throttle screw!
the cable is loose enough, theres a little play in the cable before it starts opening the butterflies so its not that.
i know about the thackery washers they still have at least 1mm or just slightly less than 1mm of the mounting rubbers showing between the cups, they were very loose when i first got to them.
i cant remember the setting nither but the nuts holding them in are still relativley finger tight in comparison to anything else you bolt up =)