The car hasn't been very healty as some might know from one of my previous Threads. Car has stood for well over a week without running. Yesterday I couldn't even start it. So today I removed the multiplugs and soldered the wires. I also cleaned the plug to the lambdasensor and checked the plugs (what gap should I run? No mods to the engine..) took the lead off the battery for about half an hour to reset the ecu (if possible on the P8?)
The car fired straight up. Tickover just below 1k.

And NOW!! White smoke on tickover, and loads more when I give it some throttle. I didn't notice anything before. It hasn't been running atleast for the past week..

Thoughts?