I've decide to stop my project to buy a saff coz everything is for sale if you want any photos please ask and i will email them or post on this thread for you.
thanks for looking.

Large front mount intercooler (twin pass)3" inlet and outlet comes with silicon 90deg bend 3"- 52mm (new) sold

2.0l zetec block just machined and honed for pistons. inc main caps and crank front breather blocked turbo oil drain and new rear breather pipe fitted sold

4 supertech forged low comp pistons (new) SOLD

4 Eagle H section steel rods(new) SOLD

new main and big end shells(standard size)(new) SOLD

1.8 zetec sump and strainer(used)

silver top cam cover(used)

Black top cam cover(used)

2.0l zetec head with cams(standard 2.0l) tapped and drilled to take erst manifold(used)

Kent cam pullies(not great condition but still will work) blue(used) SOLD

meagsquirt 2 ecu loom and disk set up to run edis4(new) SOLD

edis 4 module and plug and coil pack(used) SOLD

19 row earls oil cooler(used) SOLD

Mocal oil cooler adapor plate with thermostate(new) SOLD

custom made zetec turbo in let with massive 76mm throttle body and rover turbo injectors SOLD

universal adjustable fuel pressure regulator with gauge(used once) SOLD

universal oil breather(new) SOLD

T0E4 turbo with 360 degree thrust bearing with T3 flange good for 45psi (new) SOLD
comes with used oil drain pipe and used braided oil feed pipe

Tial Copy External waste gate(38mm) come with flanges to make your own screamer pipe(new)

Erst exhauste manifold(used) SOLD

Cosworth Pipercross cone filter(used but excellent condition) SOLD

Focus rs clutch(new) SOLD

Zetec 240mm flywheel just be re faced

All my 4x4 stuff to make a car 4x4 using mondeo escort parts inc gear box transfere box rear diff escort diff hanger mondeo diff hanger escort fuel tank and pumps rear drive shafts the important front drivers side drive shaftmondeo prop mondeo rear hubs with spacers to take escort shocks.

I'm also breaking a fiesta turbo all still avalible but no engine, gear box or managment.

I'm sure there is more i will list when i remember.

Please feel free to pm for prices or make me a sensible offer.

I will post anything you want as long as you are willing to pay the postage or you are more than welcome to pick it up or arrange your own couriour..

I'll do my best to answere any qustions you may have,

Thanks for looking,
Phil