Hi all
Ok, the bumper is off to do some cosmetic work on the lower splitter and have a general spring clean behind it as well as change the PAS pump. Thank you to you guys for your guidance, I did manage to lift the front up a bit with the adjusters before I took it off. So again thank you.

One thing I must ask is this, on the sides of the bumper where it locates top and bottom. The top slides into its slot, the bottom had the key that you push and turn to lock. This top slot has a hole through it on the actual bumper and on the chassis, like a fastener should be fitted to hold it in the slot, is this right, cos mine had none.